Francais

Products

Accessories

	203 Way Breakout Box The Breakout Box is designed to interface with a vehicle's PCM allowing the developer to manually make or break each circuit in the harness.

Software

	DINAMO DINAMO provides tools specifically designed for simulations in aerospace applications.
	ORCHESTRA Software framework for heterogeneous co-simulations, intended to work under real-time constraints.
	RT-LAB Professional RT-LAB, fully integrated with MATLAB/Simulink®, is the open Real-Time Simulation software environment that has revolutionized the way Model-based Design is performed. RT-LAB’s flexibility and scalability allow it to be used in virtually any simulation or control system application, and to add computing-power to simulations, where and when it is needed.
	RT-XSG RT-XSG enables engineers to generate custom, application specific models that can be implemented onto an FPGA device. Signal conditioning and conversion modules are also available that enable the custom model to be used for Real-Time Simulation, and Hardware-in-the-Loop (HIL) data processing. Note: RT-XSG software requirements can be found in the RT-XSG User Guide accessible from the documentation tab.

Systems

	eFLYsim eFLYsim is a Real-Time Simulator and Open- and Closed-Loop Test Bench especially designed to meet the needs of design engineers across the aerospace industry.
	PC/104 Rapid Control Prototyping A modular, compact and very robust, real-time, algorithm prototyping system based on industry-standard PC104 bus architectures and packaging for applications requiring hardened systems and extended ranges of operating temperatures RT-LAB Rapid Prototyping Controller's rugged enclosure is well suited for in-vehicle operation. Once flashed, RT-LAB Rapid Prototyping Controller boots up by itself in embedded mode, just like an automotive electronic control unit (ECU). While operating in embedded mode, RT-LAB Rapid Prototyping Controller's flight recorder can continue to log data to flash disk or hard drive, providing a solution for long-term data tracing, which facilitates field-testing. RT-LAB Rapid Prototyping Controller is configured through the RT-LAB Main Control Panel, which runs on the host PC and features a simple graphical user interface based on the typical model development process. All frequently used functions are available through a single mouse click; there is no need to memorize command lines.
	RT-Accelerator for xPC Target RT-Accelerator for xPC Target is a high-performance xPC TARGET ™ based Control prototyping and HIL systems integrating Opal-RT's FPGA processor-based IO systems. RT-Accelerator for xPC Target can also be used to develop FPGA based models and signal processing function using RT-XSG and XILINX System Generator.
	RT-LAB UAV Simulator
	Turbine Engine Simulator The RT-LAB Turbine Engine Simulator is a tightly integrated package of off-the-shelf PC components, ideal for the model-based design of a FADEC, turbine controller, or turbine engine simulation.
	HIL Box The RT-LAB HILbox features an integrated enclosure for specialized signal conditioning units (SCU). The compartment can accommodate up to 6 SCU cartridges, each comprising a carrier board, up to 2 signal conditioning modules, 96-way input connector, edge connector into the internal routing cables, and an aluminum enclosure for maximum electromagnetic screening.
	Wanda 3U 3U Rackmount enclosure with 4 rear I/O slots
	Wanda 4U 4U Rackmount Chassis with rear I/O slots

I/O Conditioning Modules

	OP5251 - Opto-Isolated 32 Digital Inputs & 32 Digital Output Module The OP5251 is one of a range of optional versatile Signal Conditioning Interfaces for the Opal-RT Technologies state of the art HIL (hardware in the loop) systems (The OP5000 series). It is planned to be used where electrical decoupling, ground loop elimination is required or in high voltage environment where complete isolation is a must. It features 32 inputs and 32 outputs channels into a single Signal Conditioning module.
	OP5252 - Opto-Isolated 64 Digital Output Module The OP5252 is one of a range of optional versatile Signal Conditioning Interfaces for the Opal-RT Technologies state of the art HIL (hardware in the loop) systems (The OP5000 series). It is planned to be used where electrical decoupling, ground loop elimination is required or in high voltage environment where complete isolation is a must. It features 64 outputs channels into a single Signal Conditioning module.
	OP5253 - Opto-Isolated 64 Digital Inputs Module The OP5253 is one of a range of optional versatile Signal Conditioning Interfaces for the Opal-RT Technologies state of the art HIL (hardware in the loop) systems (The OP5000 series). It is planned to be used where electrical decoupling, ground loop elimination is required or in high voltage environment where complete isolation is a must. It features 64 inputs channels into a single Signal Conditioning module.

Third-Party Software

	MATRIXx Opal-RT is a National Instruments Alliance Partner. They have recently acquired MATRIXx to supply engineering development tools for dynamic modeling and control applications.