OP5340 - Type B Analog Inputs

• Up to 16 different analog Input channels
• One 16-bit ADC per channel
• Simultaneous sampling on all channels.
• Eliminates skew errors inherent in multiplexed channels
• Up to 400 kS/s update rate per channel. Total throughput of 8 MS/s
• Accuracy of +/- 5mV
• On-board signal conditioning and anti-aliasing filter hardware selectable
• On-board flash memory for calibration parameters
• Library of drag-and-drop RT-LAB blocks for Simulink

The OP5340 allows up to 16 analog signals to be sampled simultaneously through a single module and features 16 differential channels with individual 16-bit Analog-to-Digital Converters (ADC). Each ADC can sample up to 400 kS/s, giving a total throughput of 8 Ms/s.

The OP5340 is one of a range of function modules for the OP5000 FPGA I/O system from Opal-RT Technologies. It allows up to 16 analog signals to be sampled simultaneously through a single module. Given that both the OP5130 External FPGA Processor, and the passive OP5220 carrier can accommodate up to two mezzanine modules, it allows up to 32 signals to be captured per carrier. Several carriers can be connected to a single board slot on an RT-LAB simulator via the OP5110 or OP5120 I/O interface.

The OP5340 features 16 differential channels with individual 16-bit Analog-to-Digital Converters (ADC), which ensures simultaneous signal capture from multiple channels, thus eliminating the skew errors associated with multiplexed channels. Each ADC can sample up to 400 kS/s, giving a total throughput of 8 Ms/s. On-board signal conditioning provides offsets and gains from +/- 100 mV to +/- 16 V as well as over-voltage protection.