GTPower Information page

Here is a demo that runs GT-POWER test made with RT-LAB 8.2pr1 REDHAWK 4.2

Please follow the steps.

1. Read carefully the documentation on how install GT-POWER on the Host:

* Documentation_for_GT-SUITE-RT_v620_Win32b9.doc: Documentation in order to install GT-POWER on the host

* GT-Power.zip: Section to add on the host

2. Target installation

For the target installation transfert this file by ftp in home/ntuser

* RT_linux_32_sp_static.tar.gz: The Libs files

Open a telnet session and type the command tar -xvvzf RT_linux_32_sp_static.tar.gz

Librairies would be install in the directory:

/home/ntuser/RealTime/GTSuiteRT

3. RT-LAB installation

For the installation of RT-LAB

Press configuration--.advanced---.file transfert

Please take the model Injectcontrol2.mdl in this directory

* Exampleworking.rar: Exampleworking.rar

Please note the configuration in the files and transfer configuration:

• Compilation_file_1.png:
  
• Compilation_file_2.png:
  

You need also in the compilation option pannels to link the libs you set on the target, THE ORDER IS VERY IMPORTANT AND SHOULD BE PLACED AS FOLLOW /home/ntuser/RealTime/GTSuiteRT/libgtcfd.a /home/ntuser/RealTime/GTSuiteRT/libifport.a /home/ntuser/RealTime/GTSuiteRT/libifcore.a /home/ntuser/RealTime/GTSuiteRT/libimf.a /home/ntuser/RealTime/GTSuiteRT/libimf.a /home/ntuser/RealTime/GTSuiteRT/libirc.a

• Compilation option:
  

You could then compile,load and execute.

GT-Power.zip - Section to add on the host
Documentation_for_GT-SUITE-RT_v620_Win32b9.doc - Documentation on GT-Power suite
RT_linux_32_sp_static.tar_.gz - The libs file for the Linux side
Exampleworking.rar - Working example with GT-POWER